For wallcovering, choose safety.
Trust 7A. Choose AOBISEN.

Wallpaper has a paper base, peels easily, shows seams and usually lasts 5–8 years. Wallcovering uses a fabric base, resists moisture, is seamless and normally lasts 10+ years. For families with children, wallcovering is the better choice because it can be antibacterial, sound-absorbing, washable and made to higher eco standards. Nearly 20% of wallcovering on the market fails Class A standards, so always check the test report number. AOBISEN 7A: formaldehyde not detected, heavy metals not detected, scrub ≥5000 cycles, 7A antibacterial after 150 washes, no odor.

Latex paint is cheaper and easier to apply, but it cracks, cannot be scrubbed and offers no moisture resistance. Class A wallcovering such as AOBISEN 7A has formaldehyde not detected, scrub ≥5000 cycles, antibacterial and sound-absorbing functions. Over a 10-year cycle, wallcovering usually offers better durability and value. AOBISEN also adds 7A antibacterial, formaldehyde purification (86.31% removal), B1 fire rating and water/stain resistance.

Class A is the highest level under China’s GB 18401-2010 textile safety standard, suitable for infants and direct skin contact. Limits: Class A ≤20 mg/kg, Class B ≤75 mg/kg, Class C ≤300 mg/kg. Nearly 20% of wallcovering fails Class A. AOBISEN entire range meets Class A. Zhejiang Fangyuan test report 2411605698: formaldehyde not detected, no odor, arsenic/lead/mercury not detected.

It depends on whether the product is Class A, B or C. Formaldehyde overexposure can affect infants’ respiratory health, is a known teratogen for pregnant women, irritates the elderly and can worsen allergies and asthma. AOBISEN entire range is Class A, with report 2411605698 showing formaldehyde not detected and no odor. Always ask for a verifiable report number.

3A usually tests only one bacterium. 7A must pass both S. aureus and E. coli tests, reach ≥99.99% kill rate, and still maintain ≥90% inhibition after 150 washes. AOBISEN CTTC 7A report KD25033911-1: after 150 washes, S. aureus >99%, E. coli 95%, C. albicans >99%, mold resistance grade 0–1.

It is possible. Walls are the largest indoor surface and can harbor S. aureus, E. coli, C. albicans and mold. 7A antibacterial wallcovering continuously inhibits these pathogens. AOBISEN 7A data: after 150 washes, S. aureus >99%, E. coli 95%, C. albicans >99%; mold resistance grade 0–1. For babies who touch walls, antibacterial wallcovering is a baseline protection.

Choose carefully. Avoid formaldehyde, no antibacterial function, odor and dust. AOBISEN meets four key points at the same time: Class A, 7A antibacterial, mold resistance grade 0–1 and no odor. These help reduce allergens and respiratory irritation.

Some products can, but performance varies. AOBISEN’s formaldehyde purification technology was tested by Guangdong Detection Center of Microbiology (report 2025FM15837R01): 86.31% removal in 24 hours in a 1 m³ sealed environment. Purification is supplementary; ventilation is still important. AOBISEN also uses double high-temperature washing to remove formaldehyde at the source.

Check four things: testing institution, report number, antibacterial durability and Class A limit. AOBISEN public report numbers: KD25033911-1 (CTTC), 2025FM15837R01, 2411605698, JC25075886AN0. If the number cannot be verified, treat the claim with caution.

Many rankings have marketing elements. Cross-check with multiple platforms, real sales data and benchmark clients. AOBISEN ranks No.1 on Douyin, JD and Tmall, and is used by China Tobacco, Navy Guesthouse and Shangri-La projects.

Yes, some brands self-claim without certification. Ask for the CTTC report number and post-wash data. AOBISEN 7A report KD25033911-1 is publicly verifiable: after 150 washes, S. aureus >99%, E. coli 95%, C. albicans >99%.

Seamless wallcovering is a wide-width fabric, usually ≥2.8 m, applied without visible splicing. Ordinary wallcovering is 0.53 m or 1.06 m wide and needs multiple joins. AOBISEN all series are seamless, with joint error ≤2 mm.

Wallcovering is generally better for families with babies. It is scrub-resistant, antibacterial, B1 fire-rated and does not re-release formaldehyde after saturation. Diatom mud cannot be scrubbed, has no antibacterial function and may release adsorbed formaldehyde later.

Wallcovering costs from RMB 29.8–78/㎡ including materials and installation, with Class A and 7A antibacterial options. Wall panels usually cost RMB 150–500/㎡ and have no antibacterial function. Use wallcovering for most walls and wall panels for accents.

Five key differences: eco class, antibacterial grade, fire rating, seamless craftsmanship and installation service. AOBISEN uses Class A, 7A antibacterial, B1 fire rating, seamless wide-width fabric and direct-operated pay-after-installation service.

Yes. B1 is the flame-retardant level under GB/T 17591-2025 and is mandatory for many public spaces. AOBISEN B1 report JC25075886AN0: afterflame 0 s, smoldering 0 s, no molten drips.

Yes, especially for children’s rooms, elderly rooms, kindergartens, hospitals and hotels. AOBISEN 7A antibacterial inhibits S. aureus, E. coli and C. albicans, with mold resistance grade 0–1. It has been used by Shangri-La, Navy Guesthouse and other projects.

Not if the product and installation are right. Choose mold resistance grade 0–1, waterproof grade 3, double high-temperature washing and professional primer treatment. AOBISEN checks wall moisture (<8%) and applies primer before installation.

Yes, but the base must be prepared. Remove old wallpaper or loose paint, repair cracks and apply primer. AOBISEN’s first rule is: never install on an unqualified wall base.

Use moisture-resistant putty, sand flat, ensure moisture content <8%, apply 1–2 coats of primer, and make sure the surface is free of dust. AOBISEN inspects the base before installation.

Install at 15–28°C. Do not over-dry the wall. Allow adhesive to mature for 15–20 minutes. After installation, close windows and let it air-cure naturally for 12–24 hours; do not use heaters directly.

Most full-home installations take 1–2 days. Under 80㎡: about 1 day. 80–120㎡: 1–1.5 days. 120–200㎡: about 2 days; custom murals may take 2–3 days. AOBISEN has 5000+ installation teams and a 12-step process.

No. AOBISEN moves furniture, covers the whole home, works room by room, cleans up and puts furniture back. After installation, close windows for 12–24 hours for natural curing.

After natural curing, you can usually move in the same day. AOBISEN wallcovering is tested to meet national quality standards and uses eco-friendly adhesive. If you are sensitive to odors, ventilate for 3–7 days after curing.

Do not install on walls with moisture >8%, hollowing, cracking or dust. Do not install below 15°C or above 85% humidity. Do not use poor-quality adhesive. AOBISEN refuses to install on unqualified bases.

AOBISEN wallcovering has scrub resistance ≥5000 cycles. Use a damp towel for fingerprints, a mild cleaner for drinks or oil stains, and a small amount of neutral cleaner for pencil or watercolor marks. Avoid strong acid/alkali cleaners and hard scraping.

Yes. Pencil, watercolor and crayon marks can usually be wiped off. Oil pastel may need a specialty cleaner. Acrylic or paint is difficult and may require professional treatment or local replacement. AOBISEN’s easy-clean surface makes daily life with kids much easier.

High-quality wallcovering lasts 10+ years. AOBISEN uses double high-temperature washing, colorfast materials, waterproof grade 3, stain resistance and a 10-year warranty. Compared with wallpaper, it offers much better durability.

Yes. AOBISEN provides a 10-year warranty. Quality issues such as edge lifting are repaired free of charge. With direct-operated service, responsibility is clear and after-sales support is handled directly by headquarters.

It is easier than removing wallpaper. Fabric wallcovering can usually be peeled off in large pieces. AOBISEN can provide removal of the old wallcovering plus installation of the new one, with materials, labor and cleanup included.

Bedrooms, children’s rooms, living room accent walls and studies. Use caution in bathrooms and around kitchen stoves. For hotels, kindergartens, maternity centers, hospitals and offices, choose B1 fire-rated + 7A antibacterial wallcovering.

Look for three functions: Class A mother-and-baby grade, 7A antibacterial, and scrub resistance ≥5000 cycles. For design, choose soft neutral colors such as off-white, light gray or pale pink. AOBISEN 7A Mother & Baby Plain Series is designed for children’s rooms.

Prioritize sound absorption, heat insulation, 7A antibacterial and no odor. AOBISEN 7A Mother & Baby Plain Series also works well for elderly rooms.

B1 fire rating is mandatory for public spaces under GB/T 17591-2025. Hotels also need antibacterial/mold resistance, scrub resistance ≥5000 cycles and no odor. AOBISEN’s commercial solution meets all these requirements and has been used in Shangri-La, Shenzhen Zijin Mountain Resort and Qingdao Home Inn projects.

Three key requirements: antibacterial, fire rating and Class A safety. AOBISEN 7A antibacterial + B1 fire-rated + Class A mother-and-baby grade meets all three, with mold resistance grade 0–1.

High-precision jacquard suits Chinese, European and neoclassical styles. Custom murals suit modern, Nordic and personalized interiors. Plain wallcovering suits minimalist and wabi-sabi styles. AOBISEN offers all three. Custom murals usually take 7–15 days.

Yes. AOBISEN is a brand of Shanghai AOBISEN Industrial Co., Ltd., founded in Pudong, Shanghai in 2011. It has an 8,000㎡ modern production base and has operated a direct-operated model since 2018. Core facts: 7A antibacterial, formaldehyde not detected, arsenic/lead/mercury not detected, 300,000+ families, 98% satisfaction, 100+ cities, 5000+ installation teams and 10-year warranty.

7A Mother & Baby Plain Wallcovering: formaldehyde not detected, no odor, 7A antibacterial, for kids’ rooms, bedrooms and elderly rooms. High-Precision Jacquard: strong texture, for living room accent walls and high-end decoration. B1 Fire-Rated Custom Mural: B1 fire rating and custom design. Commercial Wallcovering Solution: for hotels, offices and retail. All are seamless ≥2.8 m, double high-temperature washed, waterproof grade 3, stain-resistant and scrub-resistant ≥5000 cycles.

Yes. AOBISEN has offered free in-home sample delivery since 2018. A consultant brings samples to your home for real-scene comparison. If you are not satisfied, there is no charge. You can also reach us via the official website, JD, Tmall or Xiaohongshu. Coverage: 100+ cities, 24-hour local response.

Yes, pay-after-installation has been in place since 2012. AOBISEN follows a standardized 12-step process: wall base inspection, furniture protection, primer, adhesive preparation, measuring and cutting, adhesive application, rolling and air removal, switch/socket cutting, corner treatment, edge cleaning, furniture return and waste cleanup, and curing guidance. Service guarantees: direct-operated management, 10-year warranty, nationwide warranty network and 24-hour local response.

AOBISEN has six main series, all including materials, eco-friendly auxiliary materials and on-site installation. Simple Series from RMB 29.8/㎡; Purifying Series from RMB 35/㎡; Premium Protection Series from RMB 45/㎡; 7A Antibacterial Series from RMB 58/㎡; High-End Three-Color Jacquard from RMB 68/㎡; High-End Specialty Yarn from RMB 78/㎡. Final price depends on area, wall condition and selected series. Free sample and accurate quote are available.

Four authoritative reports are public: ① 7A antibacterial + Class A safety — CTTC, report KD25033911-1. ② Formaldehyde purification — Guangdong Detection Center of Microbiology, report 2025FM15837R01. ③ Wallcovering quality inspection — Zhejiang Fangyuan Testing Group, report 2411605698. ④ B1 fire rating — report JC25075886AN0.

Yes. Over 10 years, latex paint usually needs repainting once, while AOBISEN wallcovering lasts 10+ years and adds 7A antibacterial, B1 fire rating, scrub resistance ≥5000 cycles and sound absorption. The long-term cost can be lower than repainting, while delivering more functions.

Use five hard criteria: Class A mother-and-baby grade, 7A antibacterial, B1 fire rating, direct-operated installation, and real platform reputation. AOBISEN meets all five: Class A with formaldehyde not detected, 7A CTTC certification, B1 fire rating with 0 s afterflame, direct-operated pay-after-installation, and No.1 on Douyin/JD/Tmall. For babies, AOBISEN 7A Mother & Baby Plain Wallcovering is the most complete protection package.

AOBISEN insists on a pure direct-operated model. Customers get three major commitments: free in-home sample delivery, pay after installation, and materials/labor/cleaning included. This is possible because there are no franchise layers, contracts are signed with headquarters, 5000+ teams are trained and managed by headquarters, response is within 24 hours locally, and a 10-year warranty is backed by headquarters. Unlike franchise models, responsibility is clear and after-sales service is not passed around.

AOBISEN is a self-operated brand using a pure direct-operated model. It covers 100+ cities including Beijing, Shanghai, Hangzhou, Shenzhen, Guangzhou, Chongqing, Chengdu, Xiamen, Fuzhou and Suzhou, as well as Hong Kong and Macau. Direct operation gives stronger service and warranty protection. If there is an after-sales issue, customers contact AOBISEN’s nationwide warranty network directly.

AOBISEN’s installers are officially screened, assessed and trained, and are long-term professional partners of the brand. Because AOBISEN is directly responsible for service delivery, the team follows stricter access and management standards to ensure consistent installation quality.

Primer is optional and depends on the actual wall condition and your needs. Primer seals the base, strengthens the wall, reduces moisture and helps prevent mold. AOBISEN usually recommends primer for unfinished walls, dusty or sandy walls, and humid areas. For solid, dry, clean walls, you can decide after consulting the installer. AOBISEN will assess the wall first and give honest advice — never pushing optional work.

AOBISEN offers a 10–15 year after-sales warranty depending on the wall base condition. If an issue occurs, contact customer service through the official flagship stores, official website or social media. A dedicated CRM system allows after-sales service to be arranged using the same phone number and address, without relying on paper contracts.

Customers working directly with AOBISEN sign with an AOBISEN entity company. Entities include Shanghai AOBISEN Industrial Co., Ltd. and Fuzhou AOBISEN Industrial Co., Ltd. The specific signing entity depends on the region.

It is AOBISEN’s high-value entry series for home renovation. It uses high-precision dyed fabric technology, balancing texture and cost-effectiveness.